53
THE PERFECT FIT
Rear Suspension Adjustments
Weight Transfer During Acceleration
The preferred method for control-
ling weight transfer during accel-
eration is by adjusting the rear rear
scissor stop (RRSS). The factory
setting is the best for most trail
riding conditions.
To decrease weight transfer under
acceleration (for improved corner-
ing), rotate the RRSS to a higher
position.
To increase weight transfer or ski
lift during acceleration, rotate the
RRSS to a lower position.
TIP: Your dealer can help you with ini-
tial setup and additional setup
instructions to help you achieve
your optimum ride. A scissor stop
tool is also available from your
dealer.
To Next Page
Loading...
