65
OPERATION
Starting the Engine
Starting a Cold Engine (Electric Start)
Do not depress the throttle
until the engine starts.
1. Flip choke toggle to
FULL ON.
2. Pull kill switch (shut-off
switch) up to RUN.
3. Turn key to START and
crank engine.
4. After the engine starts,
releas e the key to ON
and flip the choke toggle
to OFF. If t he engine
slows or wants to stop,
use intermittent choking
to HALF ON.
Starting a Warm Engine
1. Turn key to ON.
2. Pull kill switch (shut-off switch) up to RUN.
3. Grasp starter handle and pull slowly until recoil engages; then pull
to start.
If the engine does not start on t he first pull, slightly depress t he throttle
with your left hand (no more than 1/4″ open), and pull the rope with
your right hand. When the engine starts, immediately release the
throttle.
CHOKE TOGGLE POSITIONS
Off
Half On
On
or
or
or
To Next Page
Loading...
