12.4
CHASSIS / HOOD
SEAT and FUEL TANK
FUSION SEAT AND BASE REMOVAL/
INSTALLATION
1. Remove the two bolts (A) that hold the seat base on the
tunnel.
2. Remove the seat (B).
3. Installation is reverse order of removal. Torque the seat
fasteners to 8-12 ft-lb (11-16Nm)
IQ RMK SEAT REMOVAL/INSTALLATION
1. RMK seats have a small lever at the rear portion of the
seat.
2. Lift lever and remove seat.
A
B
C
E
D
F
G
H
I
J
RMK SEAT/FUEL TANK
To Next Page
Loading...
