81
OPERATION
Electronic Reverse (PERCt)
Disengaging Reverse
1. Stop the snowmobile and leave the engine idling.
2. Push the yellow reverse button for one second and release. The light
on the instrument panel will shut off.
3. Apply the throttle slowly to make sure the transmission is in for-
ward.
n Emergency Stopping
The following chart lists methods for stopping the snowmobile in the
event of an emergency. See page 78 for more information about the
engine stop switch.
SYSTEM WHAT IT DOES
Ignition Switch Interrupts ignition circuit
Brake Slows jackshaft
Engine Stop Switch Interrupts ignition circuit
Throttle Safety Switch Interrupts ignition circuit
Tether Switch (Option) Interrupts ignition circuit
To Next Page
Loading...
