32
FEATURES
Instrumentation
MFD Settings
The MFD Control Switch allows
you to set the MFD display to your
preferences. The rocker switch has
a MODE button (top) and a SET
button (bottom). Specific instruc-
tions are outlined on the following
pages.
Standard vs. Metric
The MFD will display either standard or metric units of measurement.
While viewing a screen that displays measurements (MPH, km/h or
temperatures), press and hold the MODE switch until the unit of mea-
surement changes (about 10 seconds).
Speedometer/Tachometer
To change viewing preferences, press and hold the MODE button for
three seconds. When the button is released, the new setting becomes
active and screen colors change.
Option Digital Display Screen Backlight
1 RPM Blue
2 Speed Red
To Next Page
Loading...
