101
MAINTENANCE
Clutch System
Drive Belt Condition
Periodically check the condition and tension of the drive belt. Inspect
the belt for signs of excessive wear: frayed edges, missing cogs, cracks
and excessive looseness. Replace the belt if any of these conditions
exist. See Drive Belt Troubleshooting on page 121.
Always carry a spare drive
belt. Store the spare belt in
the belt clip located under
the left side of the hood.
Make sure the o-ring is
installed over the belt clip.
For improved drive-away during extremely cold temperatures, remove
the belt and warm it to room temperature. Reinstall it before starting the
snowmobile.
O-Ring
To Next Page
Loading...
Need help?
General
