ODOMETER/ENGINE HOUR DISPLAY AREA
This area displays the odometer, Trip 1 meter, Trip 2 meter, CLOCK, and Engine
Hours meter.
The odometer displays the total distance traveled by the vehicle since
manufacture. Each trip meter records the distance traveled by the vehicle on a
trip if the meter is reset before each trip. The CLOCK displays the time, and the
engine hour meter displays the total hours the engine has been in operation
since manufacture.
To change the display, press and release the SET button or SET switch until the
desired item is displayed.
To reset a trip meter, press and hold the SET button or SET switch until the
meter resets to zero.
PLAYBACK FUNCTION
The playback function allows the rider to record and play back engine speed,
vehicle speed and throttle position sensor information for up to three minutes.
TO RECORD
1. Press and hold the center button on the instrument cluster to enter the
Options Menu.
2. Press and release the MODE button until PLAYBACK appears in the
information display area.
47
GAUGE
To Next Page
Loading...
Need help?
General
