3. Press and release the SET button.
RECORD will appear in the information display area.
4. To begin recording, Press and release the SET button.
The playback indicator will flash while recording is in progress. Recording is
complete when the light stops flashing.
NOTICE
To stop recording at any time during the recording process, press and release
the SET button.
TO PLAYBACK
1. To play back the recorded data, stop the vehicle and wait for engine speed to
drop below clutch engagement.
2. Press and hold the center
button on the instrument cluster to enter the
Options Menu.
3. Press and release the MODE button until PLAYBACK appears in the
information display area.
48
GAUGE
To Next Page
Loading...
Need help?
General
