4. Press and release the SET button twice.
PLAY will appear in the information display area.
5. Press and release the SET button to play the recorded data.
Once playback has concluded, REPLAY will appear in the information
display area.
6. Press and release the SET button to REPLAY recorded data.
7. Press and release the MODE button to end playback and return to the
Options Menu.
STANDARD/METRIC DISPLAY
The odometer and temperature displays can be viewed in either standard or
metric units of measurement. Both displays change if units are changed. The
new settings will remain until changed by the operator.
Change Method 1
1. Press and hold the center
button on the instrument cluster to enter the
Options Menu.
2. Press and release the MODE button until engine temperature appears in the
information display area.
3. Press and release the SET button or SET switch to change units.
49
GAUGE
To Next Page
Loading...
