Polaris 700 - Page 14

14
Step 3
With the gate in the desired closed position and with
the gate operator in its fully retracted position, install
the gate operator. Ensure the gate operator is mounted
level.
Figure 13
3/8” Flat washer
3/8” – 16 Hex nut 3/8” x 1 1/8” OD x
1/2” Bushing
Clevis pin clip
3/8” x 2 3/8”
Clevis pin
3/8” – 16 x 3”
Hex bolt
3/8” x 1 1/8” OD x
3/32” Bushing
Clevis pin clip
3/8” x 1 3/8”
Clevis pin
PUSH-TO-OPEN GATE OPERATOR MOUNTING