30
Loop Detectors
Fire Box
3-Button
Edge Sensors
Receiver
Vehicle
Sensor
Photo
Beams
Push Button
Solar Panel
12 Volt Low Power
Warning Light
When using Automatic Gate Lock , power
is supplied from the control board to
unlatch the lock. Connect Gate Lock as
shown and add jumper (A).
When using Magnetic Gate Lock , power
is supplied from an external source.
Remove jumper (A) and connect power
source (B) and Magnetic Lock as shown.
1
2
ACCESSORY HOOK UP DIAGRAM
Figure 32
ACCESSORY HOOK UP DIAGRAM
To Next Page
Loading...
