EasyManuals Logo

Polaris 800 RMK User Manual

Polaris 800 RMK
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #116 background imageLoading...
Page #116 background image
114
MAINTENANCE
Battery
Battery Storage
Whenever the vehicle is not used for a period of three months or more,
remove the battery from the vehicle, ensure that it's fully charged, and
store it out of the sun in a cool, dry place. Check battery voltage each
month during storage and recharge as needed to maintain a full charge.
Tip: Battery charge can be maintained by using a POLARIS Battery Tender
TM
charger (PN 2871076) or by charging about once a month to make up for
normal self-discharge. Battery Tender
TM
can be left connected during the
storage period, and will automatically charge the battery if the voltage drops
below a pre-determined point.
Battery Charging
The following battery charging instructions apply only to the installa-
tion of a sealed battery. Read all instructions before proceeding with the
installation of this battery.
The sealed battery is already filled with electrolyte and has been sealed
and fully charged at the factory. Do not ever pry the sealing strip off or
add any other fluid to this battery.
The single most important thing about maintaining a sealed battery is to
keep it fully charged. Since the battery is sealed and the sealing strip
cannot be removed, you must use a voltmeter or multimeter to measure
DC voltage.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris 800 RMK and is the answer not in the manual?

Polaris 800 RMK Specifications

General IconGeneral
Bore x Stroke85 mm x 70 mm
Engine Stroke2-Stroke
Rear SuspensionRMK Adjustable
Track Width15 inches
Track Length155 in (393.7 cm) / 163 in (414 cm)
Track Height2.4 inches
Fuel Capacity11.5 gallons
EngineLiberty 800
Rear Travel16 in (40.6 cm)
Displacement794cc

Related product manuals