34
FEATURES
Ignition Switch
The ignition switch has three positions.
If equipped with electric start, turn the key to
START to crank the engine. When the key is
released, it automatically returns to the RUN position.
If the key remains in the RUN position after using the engine stop
switch to stop the engine, the IDD remains active. The IDD screen will
turn off after several minutes of inactivity, but if a battery is installed,
the IDD will continue to draw a small amount of current from the
battery until the key is turned off. This feature is useful for accessing the
IDD without starting the engine, but turn the key off when the IDD is
not in use.
The IDD is not dependent on a battery while the engine is running, but a
battery (if installed) supplies a constant power source when the engine is
turned off or when the engine is transitioning between forward and
reverse operation. If a battery is not installed, the IDD reboots when the
engine is started and when electronic reverse (PERC) is used.
OFF Vehicle / IDD power off
RUN Vehicle / IDD power on
START Activates starter motor (if equipped)
To Next Page
Loading...
Need help?
General
