36
FEATURES
Load Shed Relay High RPM/Voltage
Load shed relay provides power to the following components.
• High beam switch/LED array
• Battery charge relay
• Hand warmers
•Thumb warmer
The ECU will close the load shed relay when engine speed exceeds
1500 RPM and chassis voltage exceeds 12.8 VDC.
If engine speed falls below 1500 RPM or if chassis voltage falls below
12 VDC, the ECU will open the relay and will not close it again until
engine speed exceeds 2200 RPM and chassis voltage exceeds 12.8
VDC.
To Next Page
Loading...
Need help?
General
