4
85
MAINTENANCE
Lubrication
Chaincase Oil
Oil Change
1. Position the vehicle on a level
surface.
2. Remove the drain plug (4) and
drain the oil into a drain pan.
Allow the oil t o drain
completely
3. Install a new sealing was her on
the drain plug.
NOTE: The sealing surfaces on the drain plug and the oil tank
should be clean and free of burrs, nicks or scratches.
4. Reinstall the drain plug. Torque to 6-10 ft. lbs. (8-13 Nm).
5. Remove the fill plug.
6. Add 11 oz. (325 ml) of the recommended oil. Do not overfill.
7. Reinstall the fill plug, making sure it is seated properly.
To Next Page
Loading...
Need help?
General
