Polaris 93 Series User Manual

Page 14
ENG
P825
3.3 Perform Test for Defective
Motor Block
1. Unplug the cleaner.
2. Remove the lter canister. Unscrew the
impeller housing and remove impeller.
3. Remove four (4) screws inside the canister at
the handle brackets.
4. Remove four (4) screws from the bottom of
the canister bowl.
5. Pry wheel keys from each side of the brush
and remove the brush.
6. Remove two (2) screws on each side of the
cleaner body and remove body housings.

Polaris 93 Series Specifications

General

Brand	Polaris
Model	93 Series
Category	Vacuum Cleaner
Language	English