6. Repeat this procedure to install the second
brush.
1. Pull on the inside of the old tire to remove the
tire lip from the wheel (Figure 31).
1
2. Remove the old tire (Figure 32).
2
3. To replace the tire, position the tire on the
wheel making sure to orient the tire so that
the word INSIDE is toward the body of the
cleaner (Figure 33).
1
I
N
S
I
D
E
Towards
Body
I
N
S
I
D
E
I
N
S
I
D
E
4. Push one side of the tire on to the wheel and
t the rib of the tire in the groove of the wheel
(Figure 34).
2
5. Work the tire onto the wheel and verify the
rib of the tire is positioned properly within the
groove of the wheel (Figure 35).
3
6.
Push and position the rib of the inner side of
the tire in the groove of the wheel (
Figure 35).
If needed, turn the wheel gently to help with
To Next Page
Loading...
