FINAL DRIVE
7.46
9. Torque the U--bolts nuts to 40 ft.lbs. (54 Nm).
40 ft.lbs. (54 Nm)
U--Bolt Nut Torque:
40 ft. lbs. (54 Nm)
10. Torque the rear coil over shock bolts to 25 ft. lbs.
(35 Nm).
40 ft.lbs. (54 Nm)
25 ft. lbs. (35 Nm)
Rear Coil Over Shock Bolt Torque
11. Reinstall the vent hose and clamp to the rear
gearcase housing.
12. Apply anti--seize to the splines of the axle.
Reinstall the hub onto the axle. Reinstall the
domed washer, and spindle nut onto the axle.
13. Install the brake caliper. Torque the bolts to 18 ft.
lbs. (24.8 Nm).
14.
Brake Caliper Torque:
18 ft. lbs. (24.8 Nm)
To Next Page
Loading...
