EasyManuals Logo
Home>Polaris>Utility Vehicle>ACE 900 SP

Polaris ACE 900 SP User Manual

Polaris ACE 900 SP
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #119 background imageLoading...
Page #119 background image
117
MAINTENANCE
Cleaning and Storage
Storage Tips
NOTICE: Starting the engine during the storage period will disturb the
protective film created by fogging and damage could occur. Never
start the engine during the storage period.
Clean the Exterior
Make any necessary repairs and clean the vehicle as recommended. See
page 115.
Stabilize the Fuel
1. Fill the fuel tank.
2. Add POLARIS Carbon Clean Fuel Treatment or POLARIS Fuel
Stabilizer or equivalent fuel treatments or stabilizers. Follow the
instructions on the container for the recommended amount. Carbon
Clean removes water from fuel systems, stabilizes fuel and removes
carbon deposits from pistons, rings, valves and exhaust systems.
3. Allow the engine to run for 15-20 minutes to allow the stabilizer to
disperse through the entire fuel delivery system.
Oil and Filter
Change the oil and filter. See page 83.
Air Filter / Air Box
Replace the air filter. See page 97. Clean the air box.
Fluid Levels
Inspect the fluid levels. Add or change fluids as recommended in the
Periodic Maintenance Chart beginning on page 75.
Demand drive fluid (front gearcase)
Rear gearcase fluid (if equipped)
Transmission fluid
Brake fluid (change every two years and any time the fluid looks dark
or contaminated)
Coolant (test strength/fill)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris ACE 900 SP and is the answer not in the manual?

Polaris ACE 900 SP Specifications

General IconGeneral
BrandPolaris
ModelACE 900 SP
CategoryUtility Vehicle
LanguageEnglish

Related product manuals