84
MAINTENANCE
Engine Oil
Oil and Filter Change
9. Remove the oil fill cap and add
2.5 quarts (2.4 l) of
recommended oil. Reinstall the
fill cap.
10. Make sure the transmission is in
PARK. Apply the brakes.
11. Start the engine and check for
leaks.
12. Stop the engine and wait 15
seconds before removing the
dipstick.
13. Remove the dipstick. Wipe it dry with a clean cloth.
14. Reinstall the dipstick fully, then remove the dipstick and check the
oil level on the dipstick.
15. Remove the oil fill cap and add oil as needed to bring the level to
the upper mark on the dipstick. Do not overfill.
16. Reinstall the fill cap.
17. Reinstall the dipstick.
18. Dispose of used filter and oil properly.
Oil Fill Cap
To Next Page
Loading...
Need help?
General
