142
MAINTENANCE
Transmission Oil Changing Procedure
1. Remove the four screws on the footwell and gently pull outward
for access. Remove propshaft shield from the right side of the
vehicle (Scramb ler 500 4x4, Xplorer 4x4).
2. Remove fill plug.
3. Remove transmission drain plug locatedon the bottom left hand
side and drain the oil (refer to page for the location of the Mag-
num drain plug). Catch and discard used oil properly.
4. Clean and reinstall the drain plug torque to 14 ft. lbs. (1.93
kg-m).
5.Addthe correctamount of PolarisPremium SyntheticGearcase
Lubricant until oil reaches the bottom of the filler hole.
6. Check for leaks.
7. Reinstall propshaft shield or footwell and screws removed in
step 1.
To Next Page
Loading...
Need help?
General
