39
FEATURES AND CONTROLS
Console
Trip Meter/Odometer/E-Meter
Trip Switch Operation
Desired Result Press Trip Switch
Toggle between the odometer and trip meter
modes on the display
Press and hold for less than 2 seconds
Reset the trip meter to zero Press and hold for 3-9 seconds while display is in
trip mode (“TRIP” is illuminated, see page 42)
Change the display from standard to metric (MPH
to km/h and miles to kilometers)
Press and hold for 10-12 seconds while display is
in odometer mode
Display consumed power Press and release twice
To Next Page
Loading...
