70
FEATURES AND CONTROLS
Bench Seat Removal
Pull up on the front of the seat to disengage the front latches. Slide the seat forward and lift it
away from the seat base. To reinstall the seat, align the rear plunger to the socket at the rear
of the seat base. Slide the seat fully rearward, then push down firmly along the front edge of
the seat to secure the latches.
Seat Adjustment
The front seats on the GEM e4 and GEM e6® models are equipped
with manual seat adjustments. The seat adjustment lever is directly
under the front of the seat.
Move the adjustment lever to the left and slide the seat to the
desired position. Release the lever.
Make sure the seat latches securely in position. Test the latch by
attempting to slide the seat forward and rearward while seated.
To Next Page
Loading...
Need help?
General
