73
FEATURES AND CONTROLS
Seat Belts
Proper Seat Belt Use
2. Push the latch plate into the buckle until it clicks.
3. Release the strap, it will self tighten.
4. To remove slack in the lap belt portion of the belt, pull upward on the shoulder belt. To
loosen the lap belt if it is too tight, tilt the buckle and pull the lap belt slightly longer.
5. To release the seat belt, press the square red button in the buckle's center. If necessary,
slide the buckle down the webbing to allow it to retract fully.
To Next Page
Loading...
