EUROPEAN VIBRATION AND NOISE
The driver-perceived noise and hand/arm and whole body vibration levels of this
machinery is measured per EN 15997.
The operating conditions of the machinery during testing:
The vehicles were in like-new condition. The environment was controlled as
indicated by the test procedure(s).
The uncertainty of vibration exposure measurement is dependent on many
factors, including:
• Instrument and calibration uncertainty
• Variations in the machine such as wear of components
• Variation of machine operators such as experience or physique
• Ability of the worker to reproduce typical work during measurements
• Environmental factors such as ambient noise or temperature
RADIO EQUIPMENT
This vehicle contains the following radio equipment or components that contain
radio equipment:
COMPONENT COMPONENT ID MANUFACTURER
9200 Series Display RC7 Polaris Industries Inc.
B1 Gauge Bluetooth WT12 Silicon Labs
Rockford Fosgate®
Head Unit
PMX-P2 Rockford Corporations
Hereby, Polaris Industries Inc. declares that the above radio equipment radio
equipment is in compliance with EU Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
internet address: http://www.polaris.com/en-us/radio-conformity/
10
INTRODUCTION
To Next Page
Loading...
