TOGGLE BUTTONS
Press and release either toggle button
t
to cycle through the options menu or
Area 2 modes. Press and hold either toggle button to reset an item. See page
62.
TIP
With the ignition key off, pressing the MODE button or either toggle button will
power up the Rider Information Center for 10 seconds to allow viewing of the
odometer and the clock.
INDICATOR LAMPS
LAMP INDICATES CONDITION
Vehicle Speed When standard mode is selected, speed displays in miles per
hour.
When metric mode is selected, speed displays in kilometers
per hour.
Over
Temperature
This lamp illuminates to indicate an overheated engine. If the
indicator flashes, the overheating condition remains, and the
system will automatically reduce engine power.
Electric Power
Steering (EPS)
Warning (if
equipped)
This indicator illuminates briefly when the key is turned to the
ON position. If the light remains on, the EPS system is
inoperative. See your POLARIS dealer, or other qualified
person, as soon as possible for repair. Continued operation
could result in permanent damage to the EPS unit and
increased steering effort.
Neutral This lamp illuminates when the transmission is in neutral and
the ignition key is in the ON position.
High Beam This lamp illuminates when the headlamp switch is set to high
beam.
Helmet/Seat Belt This lamp is a reminder to the operator to ensure all riders are
wearing helmets and seat belts before operating. The driver’s
seat belt is equipped with a seat belt interlock. Vehicle speed
will be limited to 15 MPH (24 km/h) if the seat belt is not
secured.
Check Engine This indicator appears if an Electronic Fuel Injection (EFI)
related fault occurs. Do not operate the vehicle if this warning
appears. Serious engine damage could result. Your dealer
can assist.
58
FEATURES AND CONTROLS
To Next Page
Loading...
Need help?
General
