29
Diagnostics
1. Press any key to display the IDD screen icons.
2. Press Key 3 to display the main menu options.
3. Toggle to DIAGNOSTICS. Press Key 3 to select.
4. If any faults have been detected, a description screen
displays with the number of faults listed at the bottom
center of the display.
5. Press Key 2 or Key 4 to scroll through the faults.
6. Press Key 5 to exit.
7. For a system diagnostics inspection and/or service,
please see your authorized Polaris dealer.
NOTE: For snowmobiles, only active faults display
and the engine must be running to view faults. If the
Malfunction Indicator Light (MIL) illuminates, stop the
snowmobile but do not stop the engine if you wish to
view the faults.
NOTE: Faults display if they were active at least once
during the current ignition cycle. If the Malfunction
Indicator Light (MIL) is ON, one or more of the faults
in this list is an active fault.
To Next Page
Loading...
General