Polaris IDD User Manual

40
Change Security Code
The first time you change the security code, enter the
default security code (000) at step 4.
1. Start the engine. Do not allow an engine to run in an
enclosed area without adequate ventilation.
2. Toggle to System Settings > Vehicle Settings >
CHANGE CODE.
3. Press Key 3 to select. The ENTER CODE screen will
display.
4. Press Key 2 or Key 4 to enter the current 3-digit
security code. Press Key 5 to toggle to each digit.
Key 1 Key 2 Key 3 Key 4 Key 5
Key 1 Key 2 Key 3 Key 4 Key 5

Polaris IDD Specifications

General

Brand	Polaris
Model	IDD
Category	Monitor
Language	English