46
CONTROLS
Automatic Transmission Gear Selector
The transmission gear select or (1)
is located on the right side of the
vehicle. Shift patterns vary,
depending on your model.
H: High Gear
N: Neutral
L: Low Gear
R: Reverse
P: Park
Whenever the ATV is left unattended, always place the transmission in
gear with the parking brake locked.
Maintaining shift linkage adjustment is important to assure proper
transmission function. See your dealer if you experience any shifting
problems.
Belt Life
To extend belt life , use low for wa rd gea r in heavy pulling situations and
whe n opera ting at less than seve n miles per hour for extende d per iods of
time.
1
H
N
R
HL
N
R
HL
N
R
P
H
N
P
L
R
Shifting gears with the engine speed above idle or while the
vehicle is moving could cause transmission damage.
To change gears, stop the vehicle, and with the engine idling,
move the lever to the desired gear.
CAUTION
To Next Page
Loading...
Need help?
General
