Polaris msx 110

REVERSE GATE
REVERSE ARM
REVERSE TRACK DRIVER
REVERSE CABLE
HANDLE
GASKET
REED SWITCH
THRU-- HULL NUTS / WASHERS
ASSEMBLY NOTES
Reverse Cable Retainer Plate Fastener Torque: 22 in.lbs. (2.5 Nm)
Reverse Arm Fastener Torque: 40 in.lbs. (4.5 Nm)
Reverse Assembly -- To -- Top Deck Nut Torque: 6 ft.lbs. (8 Nm)
Reverse Cable Thru--Hull Lock Nut Torque: 16 ft.lbs. (21 Nm) Apply Loctitet 242 to threads.
Reverse Cable Jam Nut Torque: 40 in.lbs. (4.5 Nm)
Reverse Gate Pivot Fastener Torque: 14 ft.lbs. (19 Nm) Apply Loctitet 242 to threads.
Apply Premium All Season Grease to exposed parts of reverse cable.
Apply Lithium--based grease to reverse assembly moving parts.
22 in.lbs. (2.5 Nm)
40 in.lbs. (4.5 Nm)
6 ft.lbs. (8 Nm)
22 in.lbs. (2.5 Nm)
14 ft.lbs. (19 Nm)
16 ft.lbs. (21 Nm)
APPLY LOCTITEt 242
40 in.lbs. (4.5 Nm)
APPLY LOCTITEt 242
HULL AND BODY
7.132004 Four Stroke PWC Service Manual
Reverse System Assembly