Polaris MV700 - Belt Life; Automatic Transmission Gear Selector

34
CONTROLS
Automatic Transmission Gear Selector
The transmission gear
selector (1) is located on
the right side of the
vehicle.
H: High Gear
L: Low Gear
N: Neutral
R: Reverse
P: Park
To shift into HIGH or PARK,
apply the auxiliary brake to
activate the high/park lock-out
mechanism. When shifting out
of HIGH or PARK, it’s not necessary to apply the brake.
CAUTION
Shifting gears with the engine speed above idle or while the
vehicle is moving could cause transmission damage.
To change gears, stop the vehicle, and with the engine idling,
move the lever to the desired gear . Apply the auxiliary brake
before shifting into HIGH or PARK.
Whenever the ATV is left unattended, always place the transmission in
PARK and lock the parking brake.
Belt Life
To exte nd belt life, use low for wa rd gea r in heav y pulling situations and
whe n operating at less than seve n miles per hour for extende d periods of
time.
H
N
P
L
R
1