8 ft. (2.4 m)
57
OPERATION
Turning Around on a Hill
If the vehicle stalls while climbing a hill, never back down the hill!
Use the K-turn to turn around.
1. Stop the vehicle and lock the parking brake while keeping body
weight uphill.
2. Leave the transmission in forward and stop the engine.
3. Dismount on the uphill side of the vehicle, or on the left if the
vehicle is pointing straight uphill.
4. Staying uphill of the vehicle, turn the handlebars full left.
5. While holding the service brake, release t he parking brake lock and
slowly allow the vehicle t o roll around to your right until it’s
pointing across the hill or slightly downward.
6. Lock the parking brake. R emount the vehicle from the uphill side,
keeping body weight uphill.
7. Restart the engine with the transmission still in forward.
8. Release the parking brake and proceed slowly, controlling speed
with the service brake, until the vehicle is on more level ground.
To Next Page
Loading...
