61
DAILY PRE-RIDE INSPECTION
Inspect your ATV each time before riding to ensure it is in proper working or-
der. If proper inspection is not done, severe injury or death could result.
WARNING
If a proper inspection is not performed serious injury or death can result.
Always inspect your ATV before riding following the checklist carefully.
Before riding your vehicle, inspect all operating controls and parts.
Item/Inspection Procedure
1. Tires - check condition and pressures
2. Fuel and oil tanks - fill both tanks to their proper levels
3. All brakes - check operation, adjustment and fluid level (includes
auxiliary brake)
4. Throttle - check for free operation and closing
5. Headlight/Taillight/Brakelight - check operation of all indicator lights
and switches
6. Engine stop switch - check for proper function
7. Wheels - check for tightness of wheel nuts and axle nuts; check that
axle nuts are secured by cotter pins
8. Drive chain - condition and slack; refer to drive chain adjustment
9. Air cleaner element - check for dirt; clean or replace
10. Steering - check for free operation noting any unusual looseness in
any area
11. Loose parts - visually inspect vehicle for any damaged or loose nuts/
bolts or fasteners
12. Operators helmet, goggles and clothing
13. Engine coolant - (Liquid Cooled Models Only) check for proper level
at the recovery bottle
To Next Page
Loading...
Need help?
General
