159
CLEANING AND STORAGE
Washing t he Vehicle
If a high pressure water system is used for cleaning (not recommended), exercise extreme
caution. The water may damage components and could remove paint and decals . Avoid
directing the water stream at the following items:
S Wheel bearings
S Transmission seals
S Brakes
S C ab and body panels
S Labels and decals
NOTE: If warning and safety labels are damaged, contact your Polaris dealer for free
replacement.
Grease all zerk fittings immediately after washing. Allow the engine to run for a while to
evaporate any water that may have entered the engine or exhaust system.
To Next Page
Loading...
