73
OPERATION
Starting a Warm Engine
Follow t he procedure for starting a cold engine, but do not use t he choke.
If the engine has cooled to a point where it does not readily start, intermittent use of the
choke (pulled half way out) may be necessary.
If you believe the engine is over-choked when warm, push the choke lever completely in
and depress the throttle lever fully while cranking to aid in starting. Release the throttle
lever immediately after the engine starts.
If the engine does not start, review the engine troubleshooting information beginning on
page 166. If all conditions are favorable and the engine still does not start, see your Polaris
dealer for service.
To Next Page
Loading...
Need help?
General
