57
FEATURES AND CONTROLS
Parking Brake
WARNING
Operating the ATV while the parking
brake is engaged could result in an
accident and serious injury or death.
Always check to be sure the parking
brake is disengaged before operating.
Locking the Parking Brake
1. Place the transmission in first gear or
neutral.
2. Squeeze and release the brake lever
two or three times, then squeeze and hold.
3. Push the parking brake lock down to engage the lock (1). Release the brake lever.
4. To release the parking brake lock (2), squeeze and release the brake lever. The lock will
automatically disengage.
2
1
To Next Page
Loading...
Need help?
General
