3. Raise the cargo box. Unlock the dipstick lever
q
. Remove the dipstick and
wipe it dry with a clean cloth.
4. Reinstall the dipstick and push it into place. Do not lock the dipstick.
NOTE
Make certain the dipstick is inserted all the way into the dipstick tube to keep
the depth of the dipstick consistent.
5. Remove the dipstick and check the oil level.
6. Add the recommended oil as necessary to bring the oil level within the SAFE
range on dipstick. Do not overfill (see NOTE below).
NOTE
A rising oil level between checks during cold weather operation can indicate
contaminants such as gas or moisture collecting in the crankcase. If the oil
level is over the upper mark, change the oil immediately.
7. With the cargo box raised, add engine oil through the oil fill cap
w
located on
top of the valve cover, under the cargo box.
8. When finished, reinstall dipstick and lock the lever. Lower the cargo box and
secure in position.
9. Check for oil leaks.
106
MAINTENANCE
To Next Page
Loading...
Need help?
General
