3. Remove the cover
e
to access the air filter element
r
.
4. Inspect the airbox for oil or water deposits. Wipe away any deposits with a
clean shop towel.
NOTICE
Air filter removal is not needed for inspection-only.
IMPORTANT
If the filter has been soaked with fuel or oil it must be replaced.
DO NOT attempt to clean the air filter.
5. Place the air filter into the airbox. Reposition the airbox cover and install the
two retaining latches.
NOTICE
Make sure the hinge pins are properly seated when reassembling the airbox
127
MAINTENANCE
To Next Page
Loading...
Need help?
General
