4. If there is excessive free play or strange noises, or the steering feels rough or
“catchy,” have the steering system inspected by an authorized dealer.
5. Inspect boots
q
for tears. If a tear is discovered, have the boot replaced by
an authorized dealer.
WHEEL BEARING INSPECTION
1. Elevate front end of machine so front wheels are off the ground.
2. Check for any looseness in front wheel/hub assembly by grasping the tire
firmly at top and bottom first, and then at front and rear. Try to move the
wheel and hub by pushing inward and pulling outward.
132
MAINTENANCE
To Next Page
Loading...
Need help?
General
