30
Download application Polaris IQ Home to your phone.
You can also download thew application by the link to web-site www.polar.ru in the section dedicated
to this version of vacuum cleaner.
This application enable you to:
Register your robot
Set a cleanup schedule, start, stop, or cancel vacuuming cycles
Adjust vacuuming settings
Trace the vacuuming progress
Name your robot
Get access to the appliance adjustment guidelines
Find answers to FAQ
Automatically update software
Contact the support service.
The vacuum cleaner Wi-Fi network connection setup
Attention: Prior to connecting to Wi-Fi network, install the vacuum cleaner on the charge base in
avoidance of failure due to the battery discharge during setup.
Plug the charge base into a power network through the standard adapter.
Set the switch on the vacuum cleaner to the position I.
Open application Polaris IQ Home in your mobile device.
Important!
For phone with operating system Android:
New appliance configuration
The "Home" screen: click on "Add Appliance".
Select the vacuum cleaner (PVCR-1028) in the "All Appliances" list
To Next Page
Loading...
Need help?
General
