DRIVING THROUGH WATER
Your vehicle can drive through shallow
water. Make sure the water is no
deeper than the floor of the vehicle.
Follow these precautions when driving
through water:
1. Check water depth. Never drive
through water that is deeper than
the floor level.
2. After driving through water, test the
brakes. Apply the lightly several
times while driving slowly. The
Friction will help dry out the pads.
NOTE
Major engine damage can result if the vehicle is not thoroughly inspected after
operation in water. Perform the services outlined in the maintenance chart.
Give special attention to engine oil, transmission oil, and all grease fittings.If
your vehicle becomes immersed or is operated in water that exceeds the floor
level, service is required before starting the engine. Your Polaris dealer can
provide this service. If it’s impossible to bring the vehicle in before starting the
engine, perform the services outlined on page 91, and take the vehicle in for
service at the first opportunity.
DRIVING IN REVERSE
Follow these precautions when operating in reverse:
1. Always check for obstacles or people behind the vehicle. Always inspect left
and right fields of vision before backing.
2. Always avoid backing downhill.
3. Back slowly.
4. Apply the brakes lightly for stopping.
5. Avoid turning at sharp angles.
6. Never open the throttle suddenly.
64
OPERATION
To Next Page
Loading...
Need help?
General
