FINAL DRIVE
7.29
5. Install hub, flat washer,domedwasher (domedside
out) and nut. Torque center nut to 110 ft. lbs. (149
Nm). Install new cotter pin and hub cap.
Rear Hub Nut Torque:
110 ft. lbs. (149 Nm)
6. Install rear wheel and torque wheel nuts to
specification.
Out
Cone
W asher
Cone wash-
er dome to
outside
110 ft. lbs.
(149 Nm)
Flat Washer
Wheel Nut (4)
35 ft.lbs.
(47 Nm)
Rear Wheel Nut Torque:
35 ft. lbs. (47 Nm)
7. Grease all fittings thoroughly with Premium U-Joint
Lubricant (PN 2871551).
To Next Page
Loading...
