EasyManuals Logo

Polaris Ranger 6x6 2005 User Manual

Polaris Ranger 6x6 2005
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #95 background imageLoading...
Page #95 background image
1
92
MAINTENANCE AND LUBRICATION
Lights
When servicing a halogen lamp, don’t touch the lamp with bare
fingers. Oil from your skin leaves a residue, causing a hot spot that
will shorten the life of the lamp.
WARNING
Poor lighting while driving can result in severe injury or death.
Headlight and taillight lenses become dirty during normal
operation. W ash the headlights frequently to maintain lighting
quality.
Hot components can cause serious burns to skin. Do not service
the headlamps until they’ve cooled sufficiently.
Headlight Lamp Replacement
1. Open the hood.
2. Unplug the headlamp from the
wiring harness (1). B e sure to pull
on the connector, not on the wiring.
3. Turn the l amp counterclockwise to
remove it.
4. Install the new lamp.
NOTE: Make sure the tab on the
lamp locates properly in the
housing.
5. Reinstall t he harness assembly into
the headlight assembly.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris Ranger 6x6 2005 and is the answer not in the manual?

Polaris Ranger 6x6 2005 Specifications

General IconGeneral
BrandPolaris
ModelRanger 6x6 2005
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals