94
MAINTENANCE
Filter Systems
Fuel Tank Vent Filter
If the engine sputters, the inline
fuel tank vent filter may be
clogged. Do not attempt to clean
the filter. Replace the filter with
a new filter.
1. Remove the seats and
remove the engine access
panel.
Tip: Note the direction of the arrow
on the filter before removing it.
2. Remove the filter and install
the new filter. Make sure
the direction of the arrow is
the same as noted before fil-
ter removal.
3. Reinstall the access panel and seats.
Intake Pre-Filters
The engine intake pre-filter is
located on the left side of the
cargo box. The PVT intake
pre-filter is located on the
right side of the cargo box.
Inspect the pre-filters before
each use of the vehicle.
Remove the pre-filters and
use compressed air to clean
them frequently to ensure
adequate air flow.
To Next Page
Loading...
Need help?
General
