ITEM
MAINTENANCE INTERVAL
(WHICHEVER COMES FIRST)
REMARKS
HOURS CLNDR
KM
(MILES)
Engine Breather
50 H 6 M
800 (500) Inspect; replace as needed
Shift Linkage
50 H 6 M
800 (500) Inspect, lubricate, adjust
D
Steering
50 H 6 M
800 (500)
Lubricate
XU
Front / Rear
Stabilizer Bars
50 H 6 M
800 (500)
Lubricate and inspect
bushings
D Throttle Pedal 50 H 6 M
800 (500)
Inspect; adjust; lubricate;
replace as needed
Throttle Body Intake
Ducts/Flange
50 H 6 M
800 (500)
Inspect duct for proper
sealing/air leaks
Cooling System
50 H 6 M
800 (500)
Inspect coolant strength
seasonally; pressure test
system yearly
XU
Cooling Hoses
50 H 6 M
800 (500) Inspect for leaks
XU Radiator 50 H 6 M
800 (500)
Inspect; clean external
surfaces
XU
Engine Oil/Filter
Change
100 H 6 M
1600 (1000) Perform oil / filter change
Drive Belt 100 H 12 M
1600 (1000) Inspect; replace as needed
XU
Front Gearcase Fluid
(Demand Drive)
100 H 12 M
1600 (1000) Change fluid
XU
Transmission Fluid
(AGL)
100 H 12 M
1600 (1000) Change fluid
D
Fuel System
100 H 12 M
1600 (1000)
Check for leaks at tank cap,
lines, filter, pump, throttle
body, replace if necessary
XU
Engine Mounts
100 H 12 M
1600 (1000) Inspect; replace if necessary
Exhaust Muffler /
Pipe
100 H 12 M
1600 (1000) Inspect
Drive Shafts 100 H 12 M
1600 (1000) Remove and grease
D
Spark Plug
100 H 12 M
1600 (1000) Inspect; replace as needed
XU
Wiring
100 H 12 M
1600 (1000)
Inspect for wear, routing,
security; inspect connectors
subjected to water, mud, etc.
85
MAINTENANCE
Downloaded from ManualsNet.com search engine