DEMAND DRIVE OIL CHANGE
1. Support the vehicle securely with a jackstand.
2. Remove the front tire on the passenger's side.
3. Remove the fill plug.
4. Place a drain pan under the drain plug
w
on the bottom right-hand side.
5. Remove the drain plug. Drain the oil.
6. Clean and reinstall the drain plug. Torque to specification.
7. Add the recommended fluid to the bottom of the fill plug hole. Do not overfill.
8. Reinstall the fill plug. Torque to specification.
9. Check for leaks.
10.Discard used oil properly.
SPARK PLUGS
SPARK PLUG RECOMMENDATIONS
Refer to the Specifications section for the recommended spark plug type for your
vehicle. Always torque spark plugs to specification.
NOTICE
Using non-recommended spark plugs can result in serious engine damage.
Always use POLARIS-recommended spark plugs or their equivalent.
SPARK PLUG GAP/TORQUE
ELECTRODE GAP NEW OR USED PLUG TORQUE
0.7 – 0.8 mm 10 N-M (7.4 ft. lbs.)
94
MAINTENANCE
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
