POLARIS 3-MODE THROTTLE CONTROL SWITCH
The Polaris 3-Mode Throttle Control Switch
has three positions:
• Performance (PERF)
• Standard (STND)
• Work (WORK)
Always use low gear for any of the following
conditions regardless of the selected throttle
control setting.
• Operating in rough terrain or over
obstacles.
• Loading the vehicle onto a trailer.
• Towing heavy loads.
• Driving frequently at low RPM or at ground
speeds below 7 MPH (11 km/h).
ACTIVE DESCENT CONTROL (ADC) SWITCH (IF
EQUIPPED)
The ADC system allows engine braking to all
four wheels when the vehicle descends a hill
or incline. Press the top of the switch to
engage ADC. Press the bottom of the switch
to turn off ADC. Always operate in low gear
and engage ADC before ascending or
descending a hill.
50
FEATURES AND CONTROLS
To Next Page
Loading...
Need help?
General
