HVAC CONTROL PANEL (IF EQUIPPED)
To operate the cab heater, rotate the fan control
q
to the desired fan speed
setting. The far left setting turns the fan off.
Adjust the temperature by rotating the temperature control
w
to the desired heat
setting. Rotate the control clockwise to increase heat or counter-clockwise to
decrease heat.
Press the top of the A/C switch
e
to enable the air conditioning system for
cooling or defrost purposes.
WINDSHIELD WIPER/WASHER SWITCH
(IF EQUIPPED)
The windshield wiper/washer switch is located on the vehicle dashboard. The
windshield washer fluid reservoir is located under the hood.
Select the desired function by pressing
the top or bottom of the switch. The
windshield wiper/washer switch has
three positions:
• WASHER ON - top of switch fully
pressed
• WIPER ON - middle position
• OFF - bottom of switch fully pressed
51
FEATURES AND CONTROLS
To Next Page
Loading...
Need help?
General
