1. Shift the transmission to neutral. Set the parking brake.
2. Start the engine. Apply varying throttle for 10-15 seconds to expel the
moisture and air-dry the belt and clutches.
NOTICE
Do not hold the throttle pedal wide open for more than 5 seconds.
3. Allow the engine RPM to return to idle, then shift the transmission into gear.
4. Test the CVT system for belt slippage. If the belt slips, repeat the process or
remove the outer clutch cover to inspect the CVT system.
NOTICE
If the vehicle has ingested a large amount of water into the CVT system and
has not been operated for a period of time, be sure to check the CVT system
components for water damage.
103
MAINTENANCE
To Next Page
Loading...
Need help?
General
