TORQUE
Drain Plug:
10 ft-lbs (14 N·m)
10. Remove the dipstick. Add 35.5 fl oz (1050 mL) of the recommended oil. Do
not overfill. See the specifications section for capacities.
11. Reinstall the dipstick.
12. Start the engine. Allow it to idle for 30 seconds.
13. Stop the engine and inspect for leaks.
14. Wait at least 15 seconds before removing the oil dipstick. Check the oil level.
15. Add oil as needed to bring the level to the upper mark on the dipstick.
16. Dispose of used oil properly.
95
MAINTENANCE
To Next Page
Loading...
